The many things that 5G NR SSB block does!

The Synchronization Signal (SS) Block (or SSB) is the VERY FIRST signal/message that a cellular device decodes once it is powered ON or moves from the Airplane to normal mode.

5G NR is (to date) actually the epitome of the research in telco standardization. It amazes me how a single feature in 5G NR can accomplish so many multiple tasks or activities. In this very short article, I will articulate The Many Things that UE can accomplish with the SSB block.

Primarily, the SSB is comprised of only three components as shown in Figure above.

• Primary Synchronization Signals (PSS)

• Secondary Synchronization Signals (SSS)

• Physical Broadcast Channel (PBCH) information.

However, with the SS Block, a device is able to perform several of the following tasks, simultaneously.

1. Frequency and Timing Synchronization with the cell.

2. Obtaining the cell’s Physical ID (aka PCI).

3. Measure and report cell level RSRP and RSRQ levels.

4. Obtain parameters to decode System Information (SI), especially System Information Block-1 (SIB1).

5. Beam Sweeping.

There would-be other uses for SSBs as well, but these are the most common that I know of. If you get to know any more, do tell me in the comments.